Skip to product information
1 of 6

Geekpure Water Group

Whole House Water Filtration System Single Stage w/ 10" Housing 1"NPT & 4.5"x 10" Carbon Block Filters

Whole House Water Filtration System Single Stage w/ 10" Housing 1"NPT & 4.5"x 10" Carbon Block Filters

Regular price $95.99 USD
Regular price $139.99 USD Sale price $95.99 USD
Sale Sold out
Shipping calculated at checkout.

 Advantage

  • 1 Stage Whole House Water Filtration System. 1x 10 inch big size blue housing (1"NPT inlet/outlet),4 X Carbon Block Filters ,1 x plastic wrench,1 bag screw and 1 x metal bracket in the box..
  • PURE-It is Installed at the main water supply and produce pure water for your entire home. Enjoy better water from every tap and every appliance in the whole house.
  •  FUNCTION-Carbon block filter is used to reduce chlorine, taste & odors 
  • LIFE TIME:6-12 months or 100K gallons water.Flow rate : 5-15 GPM (Depend on Feed Water Pressure), 1 Year warranty.Note:this system will NOT reduce Total Dissolved Solids (TDS),but keeps healthy minerals in your water. If you are searching for a filter that removes TDS, Please refer Geekpure Reverse Osmosis systems

Product description

Specification:

Maximum Test Pressure: 90 psi (6.2 bar),it is test pressure.SUGGESTED WORK PRESSURE: UNDER 50 PSI 
Temperature:40-110°F/5-45°C
Shelf life: 5 Years

More valuable information:
✪What is dimension of the big size blue housing and carbon filter?
It is 4.5"OD x 10" height .
✪What is in the box?
1x 10 inch big size blue housing 1"NPT inlet/outlet,4 X Carbon Block Filters ,1 x plastic wrench,1 bag screw and 1 x metal bracket in the box.

Note:
Please lubricate the o-ring with silicon grease and use wrench provided to prevent leakage.
2. Protect filter housing from freezing. 
3. This filter housing has a maximum test pressure rating of 90 psi, if you suspect that your water pressure will at any time exceed 60 psi, a pressure regulator MUST BE INSTALLED before the filter housing. this action will guard against the water pressure exceeding the maximum pressure rating.it is recommended that the pressure regulator be set at 60 psi or less.
4.The rubber o-ring provides the water tight seal between the cap and the sump. it is important that the o-ring be properly SEATED IN THE GROOVE of a water leak could occur.

View full details

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)