Features:
- Replacement Filters Set for Geekpure 800 GPD Tankless Reverse Osmosis System (ASIN B09TDR93XG).The rotating and pulling structure filter element is convenient to replace the filter element by yourself.No fuss, no mess, No tools
- Pack of 2 filters in the box. Filter Precision down to 0.0001 micron. Removes arsenic, lead, fluoride, mercury and 1000+ contaminants in water. Feed Water Condition: Water Pressure: 15-60 psi, Temperate: 40-100°F/5-45°C
- NSF certificated Reverse Osmosis Membrane , high capacity at 800 gallons pure water per 24 hous
- 2:1 Pure to Drain,low waste water ratio but high rejection rate
- After the installation is complete, please open the tap and rinse the system for 30 minutes first
- JUST SELL IN USA,EUROPEAN
Specification:
FEED WATER PRESSURE: 15 - 60 PSI,
TEMPERATE:40-110°F/5-45°C ,
PH:3.0 -11.0 ,
MAX TDS :1000 PPM,
TURBIDITY < 1.0 NTU,
MAX SDI <4.0,
HARDNESS < 5 GPG,
IRON <0.1,
MANGANSESE <0.05
Shelf life: 2 Years
Note:
1.It Is Recommended to Wait Until the Entire System Is Pressurized (Including Faucet) and Re-Check for Any Leaks Before Leaving Installation Site.
2.It Is Normal for Some Black Carbon Fines to Appear in The Water When Flush New Filters.
3.The First 30 Minutes of Water Produced Should be Emptied and Not Used.Push the Tubing All the Way in and Use Teflon Tape During Installation.
FQA
1.What is in the box?
ANSWER: 2 Filters in the box. That is 1 x PP&Carbon filter, 1 x 800 GPD Ro membrane.
2.BPA free?
ANSWER: Yes, BPA free .
3.It fit with other brands?
Not yet,it just fit Geekpure 800 GPD Tankless Reverse Osmosis System (ASIN B09TDR93XG),If other brand, please purchase replacement filter from your preivous seller.