- COMPLETE-1 Stage Whole House Water Filtration System.1 x 10 inch big clear housing (1"NPT inlet/ourlet),1 X PP Sediment Filter ,1 x plastic wrench,1 bag screw and 1 x metal bracket in the box.
- PURE-It is Installed at the main water supply and produce pure water for your entire home. Enjoy better water from every tap and every appliance in the whole house.
- FUNCTION-PP Sediment is used to remove silt, sand, rust, dirt, and other undissolved particles.
- HIGH QUALITY-Fits NSF standard,Large capacity housing for high flow applications
- LIFE TIME:6-12 months or 100K gallons water.Flow rate : 5-15 GPM (Depend on Feed Water Pressure), 1 Year warranty.Note:this system will NOT reduce Total Dissolved Solids (TDS),but keeps healthy minerals in your water. If you are searching for a filter that removes TDS, Please refer Geekpure Reverse Osmosis systems
Maximum Pressure: 90 psi (6.2 bar),it is test pressure.SUGGESTED WORK PRESSURE: UNDER 50 PSI
Shelf life: 5 Years
More valuable information:
✪What is dimension of the big blue housing and filter?
It is 4.5"OD x 10" height .
✪What is in the box?
1 x 10 inch Big Clear housing-1"NPT Inlet/Outlet,1 X PP Sediment filter ,1 x plastic wrench,1 bag screw and 1 x metal bracket in the box..
✪What is filters options?
1.PP spun filter, Remove sand, dirt, sediment. life time:6 months.ASIN:B07797MT8K / B07JPZ183L.
2.Carbon block filter, Further remove chlorine, taste & odors, very fine particulates. life time:6 months. ASIN:B077971QT7 / B07JNC5GM4.
3.PP pleated filter, the material is same as PP sediment,Remove sand, dirt, sediment. life time:6 months. ASIN:B07TMCPJVD or string filters (ASIN:B07TJ6MXKM)
PS.The Life Time of the Filter Cartridge Depends on Usage Amount and Feed Water Quality.
Please lubricate the o-ring with silicon grease and use wrench provided to prevent leakage.
2. Protect filter housing from freezing.
3. This filter housing has a maximum operating pressure rating of 90 psi, if you suspect that your water pressure will at any time exceed 80 psi, a pressure regulator MUST BE INSTALLED before the filter housing. this action will guard against the water pressure exceeding the maximum pressure rating.it is recommended that the pressure regulator be set at 50 psi or less.
4.The rubber o-ring provides the water tight seal between the cap and the sump. it is important that the o-ring be properly SEATED IN THE GROOVE of a water leak could occur.