Skip to product information
1 of 5

Geekpure Water Group

20" Slim Blue Filter Housing for Whole House Water Filtration System-2.5"x20"

20" Slim Blue Filter Housing for Whole House Water Filtration System-2.5"x20"

Regular price $47.99 USD
Regular price $69.99 USD Sale price $47.99 USD
Sale Sold out
Shipping calculated at checkout.
Advantage
  • Complete 1 set 20 inch blue housing,3/4 inch plastic ports with pressure relief button for high pressure,with plastic wrench and metal bracket.
  • STANDARD-Fits all standard sized 2.5 inch x 20 inch filters housing only, filter cartridges are sold separately.
  • APPLICATIONS-Large capacity housing for high flow applications,Used in whole house, reverse osmosis, commercial and geekpure filtration.
  • WARRANTY-Fits NSF standard.One year limited warranty.
  • ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA).

Specification:
Maximum Pressure: 90 psi (6.2 bar)
Temperature:40-110°F/5-45°C
Shelf life: 5 Years

More valuable information:
✪What is dimension of the blue housing?
It fits all standard sized 2.5 inch x 20 inch filters .
✪What is in the box?
1x20inch slim housing with pressure release and 3/4 inch NPT port, 1pc plastic wrench ,1pc metal bracket.
✪What is filters options?
1.PP spun filter, Remove sand, dirt, sediment. life time:6 months.ASIN: B07DLRNP56.
2.Granular activited carbon filter, Remove chlorine, taste & odors, very fine particulates. life time:6months. ASIN:B07DLS71NJ.
3.Carbon block filter, Further remove chlorine, taste & odors, very fine particulates. life time:6 months. ASIN:B07DLSTWNB.
PS.The Life Time of the Filter Cartridge Depends on Usage Amount and Feed Water Quality. 

NOTE: Just ship address in US. No inventory in other countries.thanks.

Note:
1. Protect filter housing from freezing. 
2. This filter housing has a maximum operating pressure rating of 90 psi, if you suspect that your water pressure will at any time exceed 80 psi, a pressure regulator MUST BE INSTALLED before the filter housing. this action will guard against the water pressure exceeding the maximum pressure rating.it is recommended that the pressure regulator be set at 70 psi or less.
3.The rubber o-ring provides the water tight seal between the cap and the sump. it is important that the o-ring be properly SEATED IN THE GROOVE of a water leak could occur.

View full details

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)