Geekpure 2 Stage Whole House Water Filtration System w/ 20" Blue Housing-1"NPT
Geekpure 2 Stage Whole House Water Filtration System w/ 20" Blue Housing-1"NPT
Advantage
- 2 Stage Whole House Water Filtration System w PP Sediment and Carbon Block Filter ,with 2 x 20 inch housing,plastic wrench,metal bracket and screws
- It is Installed at the main water supply and produce pure water for your entire home. Enjoy better water from every tap and every appliance in the whole house
- FUNCTION-PP Sediment is used to reduce silt, sand, rust, dirt, Carbon block filter is used to reduce chlorine, taste & odors . life time:6-12 months.
- LIFE TIME:6-12 months or 100 K gallons water.Flow rate : 5-15 GPM (Depend on Feed Water Pressure), 1 Year warranty.Note:this system will NOT reduce Total Dissolved Solids (TDS),but keeps healthy minerals in your water. If you are searching for a filter that reduce TDS, Please refer Geekpure Reverse Osmosis systems
Product description
Specification:
Maximum Test Pressure: 90 psi (6.2 bar) ,It is test pressure, SUGGESTED WORK PRESSURE IS UNDER 50 PSI
Temperature:40-110°F/5-45°C ,
Shelf life: 2 Years.
More valuable information:
1. What is dimension of the housing and filters ?
ANSWER: It is standard sized 4.5" OD x 20" height filters and housings .
2. What is in the box?
ANSWER: 2 x 20 inch blue housing with pressure release , plastic wrench ,metal bracket and screws,1 x PP sediment filter, 1 x carbon block filter.
Note:
1. Please lubricate the o-ring with silicon grease and use wrench provided to prevent leakage. you may search "whole house water filter " on YouTube, there is some video about this housing, it is very helpful if it is the first time to install it.
2. Protect filter housing from freezing.
3. This filter housing has a maximum test pressure rating of 90 psi, if you suspect that your water pressure will at any time exceed 60 psi, a pressure regulator MUST BE INSTALLED before the filter housing. this action will guard against the water pressure exceeding the maximum pressure rating.it is recommended that the pressure regulator be set at 50 psi or less.
4. The rubber o-ring provides the water tight seal between the cap and the sump. it is important that the o-ring be properly SEATED IN THE GROOVE of a water leak could occur.